Turborix Advance Ultra-High Power 70A / 42V Brushless Motor ESC Electronic Speed Controller

Turborix Advance Ultra-High Power 70A / 42V Brushless Motor ESC Electronic Speed Controller Overview

Features:

• Features: Brake: Off/Average/One (Off by default).
• Type of battery: Nixx/ 6- 30 pcs / LiPo (LiPoly 2- 10 pcs)
• Driving threshold of cut on weak battery: 47/55/63/71 % (Nixx) or 2,7/2,8/2,9/3/3,1 V (LiPo) (2,8 V by default).
• Cut engine: Off/Limitation of power/brutal Cut (limitation by default).
• Starting: Soft/Average/Normal (means by default).
• Timing: Weak/Average car// Extremely (car by default).
• Quench frequency: 8/16 Khz (8 Khz by default).
• Protection in temperature (reduction of the power engine to the top of 120 deg.C).
• Protection counters unexpected startings.
• Protection in the event of loss of the radio operator signal.
• MosFets transistors with very low internal resistance.
• Powerful microprocessor.
• Very effective radiator.
• Wire of sections suitable with the acceptable currents.
  
  

Specification:
Continuous Current (A) : 70A
BEC : N/A
* External MU-061 U-BEC required.(Not Included)
Suitable Battery : LiPo (2-10 cells);NIHM (6-30 cells)
Max Voltage : 42Vdc
Programmable : Yes
Size : 96.70 x 28.45 x 19.36mm
Weight : ~80g
Gross Weight : ~110g

Dymo Labelers Possini Floor Lamps Pier One Shower Curtains

Hacker A50-10S Brushless Outrunner RC Motor, 395g, 1250W, 588 RPM/Volt

Hacker A50-10S Brushless Outrunner RC Motor, 395g, 1250W, 588 RPM/Volt Overview

Hacker A50-10S brushless motors are designed for the very popular .46 to .90 size RC models. Intended as a direct replacement to power your model with quiet and clean electric power. The powerful and efficient 14-pole "Outrunner" Brushless motor design creates massivetorque, which will allow you to direct drive larger props without needing a gearbox. This motor features Oversize bearings, curved Neo-magnets, and uses High-efficiency stator design.Additionally you will find a special large concentric bearing located in the rotor to support the rotating mass during extreme 3D maneuvers. A cooling fan is mounted on the motor to provide proper motor cooling for closed cowling or helicopter applications. Features an integrated 6mm threaded shaft and prop adapter for superior reliability. Technical Specifications for Hacker A50-10S * Motor Type: Brushless, Outrunner * Idle Current: 3.1 Amps * Operating Current: 40 Amps * Peak Current: 55 Amps * Peak Watts: 1250 Watts * Resistance: 0.012 Ohms * RPM / Volts: 588 RPM/V * Recommended Battery: 4 Cell LiPolymer 6000 mAh * Shaft Diameter: 6.0mm * Weight: 395g (13.9oz)

Floxite Lighted Travel Mirror belkin surge protector recall

Himax HC2812-0650 Electric Brushless Outrunner Motor 64g 150W

Himax HC2812-0650 Electric Brushless Outrunner Motor 64g 150W

Rate This Product :

The Himax HC2812-0650 150 watt Electric RC Brushless motor is manufactured to high standards for the discerning airplane modeler. Designed for extreme light weight, efficiency, torque, and durability. Himax Electric Brushless outrunner motors are sure to take your radio controlled aircraft to a whole new level. If you are looking for value and performance, The wide range of Himax products will provide you with precisely what you need. This 150 watt motor is for small models weighing up to 18 oz. for 3D flight, up to 24 oz. for aerobatic flight and as high as 30oz. for leisure flight. The 2812-0650 is equivalent to a .10 size glow engine. Specifications Power: 150W KV: 650 ESC Rating: 10A Weight: 64g Diameter: 28mm Length: 29mm Shaft Diameter: 4mm Prop Size: 9x5 - 12x6 Rm: .285 lo: .36 This Package Includes: Wobbly prop adapter Collet prop adapter Stick Mount Radial Mount Bullet connectors Himax Decals Useful information for the use and service of Himax Electric Brushless Motors: When setting up your Himax Electric Brushless motor system, Always use a wattmeter or current meter to monitor the current draw during set up. This helps you to optimize your setup and avoid damaging your RC equipment - motor, ESC, or battery. When installing the motor, be careful not to damage the three motor wires. They are not repairable. When any wire is broken, the motor is gone instantly and is NOT covered under warranty. If you would like to install a press fit pinion, be careful. Pressing the pinion incorrectly or without proper tools could ruin the motor and it is NOT covered by the warranty. If you want to remove the factory installed connectors, un-solder them. These are varnished magnet wires. If you cut them, you will have a difficult time resoldering them unless you follow the correct procedure with the right tools. If the shaft is bent, or the gear is worn, parts are available for Do-it-yourself repair. It is cheaper and faster, if you can repair it yourself.

• Power: 150W
• ESC Rating: 10A
• Weight: 64g
• 28 x 28 x 29mm
• Prop Size: 9x5 - 12x6

Available at Amazon : Check Price Now!

*** Product Information and Prices Stored: Aug 04, 2011 00:10:45 ***

best face washes for acne External Hard Drives Kelkoo clip bike pedals