Sunday, September 4, 2011

Radio Controlled Helicopter - What is the difference between the channels 2, 3, 4, 5 and 6 channels?

Radio Controlled Helicopter - What is the difference between the channels 2, 3, 4, 5 and 6 channels?

Rc Helicopter

All radio controlled helicopter enthusiasts will tell you that flying RC helicopter is the exciting and thrilling for all RC models. Cars, trucks, tanks, boats and robots are all confined to the front / rear and moving left / right, but Radio Controlled Helicopters full Technicolor, surround sound, 3D motion have. The only limit to your excitement and fun of flying is your ability, space and sophistication of the model RC Helicopter.

Sowhat exactly is it allows your helicopter to perform complex aerial acrobatics?

In short, is the number of channels that can be controlled by you - the more you have, the better the maneuverability of the helicopter RC.

But do not think that more is better to be deceived. Piloting a helicopter is in flight just as complicated and intelligent than the real thing. Just because yours is the smallest helicopter in the scale does not mean changing the laws of aerodynamics! To achieve this goalsuccessful flight, remain all the same criteria. Do not fly a model has the advantage of starting with a basic set of controls and work your way up to Full Monty, and this is achieved through the mastery of an increasing number of channels.

But first we must understand that each channel controls a servo-mechanism in a separate model. And for those of us who find it helps to understand how something works, it helps to know that a servant is a mechanicDevice and the movement of an element to "push" with a control lever. You can control the degree of "push" the lever exerts a servant by the controls on the transmitter to the receiver. The more the servant "push" the greater the resulting movement of the element of acting. Then move the angle of the tail rotor, for example, you need a channel to control the tail rotor servo.

Just like any moving part of a RC helicopter needs its own power, you also need an additionalChannel for each individual. With an increased ability to optimize the interaction of the individual servo channel on your mobile phone, you will be able to be a growing range of aircraft movements for your remote control for the production of helicopters.

Here is a list of basic differences between the number of channels on a remote controlled helicopter:

2 channels offer the possibility of two servo-control mechanisms, making it possible to control the movement up and down(Speed ​​of the rotor blades) and the left and right (rear rotor, directional controls). 3 channel tries to match the controlled movements of the body, above, but with the addition of forward and backward motion control (cyclic). 4 channels to control the throttle, elevator, ailerons, rudder, improve controls on the handling of the above fixed-pitch propeller. 5 channels are rarely deviates more common six-channel model. These channels offer additional qualified flyerCapacity, real 3D movements conducted by air from the field and the gyro gain control in the mix.

Everything can be very complicated!

So what is the best choice for you? Well, if you're just getting started with remote control helicopters, 2-channel models of keys at first. Learn the basic movements across the way through the ranks first teacher, until the impressive, but the sophisticated models with 6 channels. Whatever you choose always to have fun with your RC HelicopterSafe flight and enjoy your flying skills improve!

cr123 rechargeable batteries and charger amish corner tv stands

No comments:

Post a Comment